18307-2RS ZEN Sealed Deep GrooveBall Bearing 18x30x7mm

View all ZEN Deep Groove Ball Bearings

Single row deep groove ball bearing. 18mm inside x 30mm outside x 7mm width, also known as 18307 2RS, 18307RS

ZEN Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Principal Dimensions

Inside diameter: 18mm
Outside diameter: 30mm
Width: 7mm

ZEN Group has been producing quality bearings that meet the stringent demands of our customers. Zen produce both standard and tailor made custom solutions engineered for the toughest production challenges. In these fast moving times their combination of creativity, innovation and technical expertise ensures customers worldwide experience consistent, industry leading quality in every bearing we manufacture. The ZEN group was established in Dusseldorf, Germany in 1992 specializing in manufacturing German industry standard bearings in China.

ZENSpecializing in manufacturing German industry standard bearings in China.