- Bearings
- Belts
- Bike Bearings
- Grease
- Kukko
- Linear Bearings
- Loctite
- Oil Seals O Rings Circlips
3801 LLU MAX Enduro Double Row Sealed Radial Suspension Bearing Abec 3 - 12x21x8mm
Dimensions - d (inside diameter) 12mm Dimensions - D (outside diameter) 21mm Dimensions - B (width) 8mm Enduro MTB Frame Suspension pivot bearing used by Trek and Devinci
Enduro Bearings pioneered MAX type bearings over 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX-type bearings provide 35-40% more load capacity than standard radial bearings by utilizing a special design where the maximum number of balls are inserted into the bearing, via a custom ground slot in the races. The additional balls, combined with deep race grooves in these bearings providing greater lateral support for the twisting and multi-directional forces associated with mountain bike pivots. This ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside. The extra-wide double-row design greatly reduces flex in the suspension linkage while doubling the bearing contact area.
This bearing has been used as a suspension pivot bearing by Trek and Devinci.
The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls and feature dual-lip seals that ride in a micro-groove creating full labyrinth to provide long life and superior protection against the elements.
Static load - 620lbf / 2.75kN
Weight - 10.4g
EnduroThe world's No1 Bike BearingsRelated products Similar to 3801 LLU MAX Enduro Double Row Sealed Radial Suspension Bearing Abec 3 - 12x21x8mm
698 LLU MAX Enduro Sealed Radial Suspension Bike Bearing Abec 3 - 8x19x6mmOriginal Enduro single row ball sealed MAX bike bearing 8mm inside x 19mm outside x 6mm widthPrice Breaks / More Information
R6 LLB Enduro Sealed Radial Ball Bearing 3/8" inside x 7/8" outside x 9/32" wideThis size bearing is generally used as a hub bearing for BMX hubs, and can also be used as a pivot bearing 3/8" inch inside x 7/8" inch outside x 9/32" inch widthPrice Breaks / More Information
688 A LLB Enduro Extended Inner Race ABEC-3 Radial Suspension Bearing 8x16x5/8mmEnduro 688-A LLB Sealed bike bearing with an extended inner race 8mm inside x 16mm outside x 5mm/8mm widePrice Breaks / More Information
608 LLU MAX E Enduro MAX Design Sealed Extended Inner Radial Bike Bearing Abec 3 - 8x22x7/10mmOriginal Enduro this bearing has been used as a suspension pivot bearing by a number of bicycle brands.Price Breaks / More Information
- Belts
