- Bearings
- Belts
- Bike Bearings
- Grease
- Kukko
- Linear Bearings
- Loctite
- Oil Seals O Rings Circlips
3902 LLU MAX Enduro Sealed Double Row Radial Suspension Bike Bearing Abec 3 - 15x28x10mm
Dimensions - d (inside diameter) 15mm Dimensions - D (outside diameter) 28mm Dimensions - B (width) 10mm Original Enduro 3902 LLU MAX - MAX-Design, Double Row, ABEC-3, radial suspension bearing -15mm x 28mm x 10mm
Enduro Bearings pioneered MAX type bearings almost 20 years ago for bicycles to address the challenges associated with mountain bike pivots. MAX bearings provide 35-40% more load capacity than standard radial bearings by employing with a special design where the maximum number of balls (full-complement) are inserted into the bearing, via a custom ground slot in the races. The race grooves are also deeper on these bearings to provide increased lateral support to counteract the twisting and multi-directional forces associated with mountain bike pivots. This MAX-type, Double-Row, ABEC-3 bearing features deep-groove design races, with Grade 10 balls and full-contact, double-lip, labyrinth (LLU) seals for maximum protection against the elements, while keeping the 90% fill of Almagard extra high pressure grease inside. The double-row design greatly reduces flex in the suspension linkage while doubling the bearing contact area.
This bearing has been used by Alutech Cycles as a suspension pivot bearing.
The Enduro line of bearings are available in high-carbon chromium steel, 440C stainless steel, ceramic-hybrid and XD-15 with ceramic or stainless balls. Our bearings are always engineered with deepest groove races possible to accommodate the largest balls possible and feature dual-lip seals that ride in a micro-groove creating a full labyrinth to provide superior protection against the elements.
Static load - 1582lbf / 7.02kN
Weight - 24.81g
EnduroThe world's No1 Bike BearingsRelated products Similar to 3902 LLU MAX Enduro Sealed Double Row Radial Suspension Bike Bearing Abec 3 - 15x28x10mm
3903 LLU E Enduro Double Row Sealed Radial Suspension Bearing with Special Extended Inner Abec 3 - 17x30x10/13mmOriginal Enduro double row ball sealed bike bearing with extended inner 17mm inside x 30mm outside x 10mm/13mm widthPrice Breaks / More Information
MR24371 LLB Enduro Sealed Radial Bottom Bracket Bearing for Trek BB90 Abec 3 - 24x37.1x7mmOriginal Enduro single row ball sealed bottom bracket bearing for Trek BB90 where a slightly larger outside diameter is required to eliminate play seen by the 37mm bearing (MR2437) 24mm inside x 37.1mm outside x 7mm widthPrice Breaks / More Information
6806 LLU MAX Enduro Sealed MAX Design Radial Suspension Bike Bearing Abec 3 - 30x42x7mmOriginal Enduro single row ball sealed bike bearing 30mm inside x 42mm outside x 7mm width, this bearing has been used as a suspension pivot bearing by a number of bicycle brands including Ibis.Price Breaks / More Information
699 LLB Enduro Sealed Radial Bike Bearing Abec 3 - 9x20x6mmOriginal Enduro bike bearing 9mm inside x 20mm outside x 6mm widthPrice Breaks / More Information
- Belts
