61808 2RS BKL Brand Sealed Deep Groove Ball Bearing 40x52x7mm

View all BKL Brand Deep Groove Ball Bearings

BKL Single row deep groove ball bearing with two rubber seals 40mm inside x 52mm outside x 7mm width, also known as 618082RS, 68082RS, 6808RS, 68082RS, 6808LU, 6808LLU, 6808DU, 6808DDU

BKL Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Principal Dimensions
Inside diameter: 40mm
Outside diameter: 52mm
Width: 7mm

BKL BrandBearing King offer a full range of BKL Brand products including ball, self-aligning, angular contact, cylindrical, needle and spherical bearings at highly competitive prices which are available for same or next day delivery