63/22NR NTN Open Deep Groove Ball Bearing with Circlip Groove and Circlip 22x56x16mm

View all NTN Deep Groove Ball Bearings

View all Deep Groove Ball Bearings with Circlip

Single row deep groove ball bearing with circlip groove and circlip. 22mm inside x 56mm outside x 16mm width

Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

d - Internal diameter 22 mm
D - External diameter 56 mm
B - Bearing/Inner ring width 16 mm
a min - Min position Groove 2,31 mm
a max - Max position groove 2,46 mm
rs - Min fillet radius 1,1 mm
rNs - Min fillet radius 0,5 mm
D3 - Max bottom groove diameter 53,6 mm
b min - Min groove width 1,35 mm
b max - Max groove width 1,65 mm
r0 max - Max bottom groove radius 0,4 mm
D4 max - Max outer diameter of assembled stop ring 61,7 mm
f - Stop ring thickness 1,12 mm
Snap ring reference R56
Radial clearance class CN
Mass 0,176 kg

PRODUCT PERFORMANCE
C - Dynamic load 20,4 kN
C0 - Static load 9,25 kN
Cu - Fatigue limit load 0,725 kN
f0 - Coefficient 12.4
Nlim - Oil lubrication limit speed 15000 tr/min
Nlim - Grease lubrication limit speed 13000 tr/min
Tmin - Min operating temperature -40 C
Tmax - Max operating temperature 120 C

ABUTMENT
da min - Min shoulder diameter IR 28,5 mm
Da max - Max shoulder diameter OR 49,5 mm
ra max - Max shaft & housing fillet radius 1 mm
rNa max - Max fillet radius on segment side 0,5 mm
Ca min - Mini segment position 3,43 mm
Ca max - Max segment position 3,58 mm
Db min - Min stop ring position diameter 62,5 mm

NTNNTN is a one of the world's largest bearing producers. With manufacturing plants throughout the world.