Home » 6310/C3 SKF Open Deep Groove Ball Bearing 50x110x27mm

6310/C3 SKF Open Deep Groove Ball Bearing 50x110x27mm

In stock
SKU: 6310/C3-SKF
Single row deep groove ball bearing with C3 clearance 50mm inside x 110mm outside x 27mm width, also known as 6310C3
From £23.66
£19.72 exc.VAT
FREE UK MAINLAND DELIVERY ON ORDERS OVER £50

Product details

  • Vendor SKF
  • SKU 6310/C3-SKF
  • Inside diameter (d) 50mm
  • Outside diameter (D) 110mm
  • Width (B) 27mm
Description Delivery Returns
SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Principal Dimensions
Inside diameter: 50mm
Outside diameter: 110mm
Width: 27mm

Basic Load Ratings
Dynamic: 65kn
Static: 38kn

Speed Ratings
Reference speed: 13000 r/min
Limiting speed: 8500 r/min