W6003-2RS1 SKF Sealed Stainless Steel Deep Groove Ball Bearing 17x35x10mm

View all Stainless Steel Deep Groove Ball Bearings

View all SKF Deep Groove Ball Bearings

SKF Stainless steel single row deep groove ball bearing with two rubber seals 17mm inside x 35mm outside x 10mm wide, also known as S60032RS, SS60032RS, W60032RS

SKF Stainless steel single row deep groove ball bearing with seals or shields on both sides, provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.

Greater chemical and corrosion resistance
Integral sealing prolongs bearing service life
Typical benefits of single row deep groove ball bearings

Dimensions
d 17 mm Bore diameter
D 35 mm Outside diameter
B 10 mm Width
d1 ?23.5 mm Shoulder diameter
d2 ?23.5 mm Recess diameter
D2 ?31.85 mm Recess diameter
r1,2 min.0.3 mm Chamfer dimension

Abutment dimensions
da min.19 mm Diameter of shaft abutment
da max.23 mm Diameter of shaft abutment
Da max.33 mm Diameter of housing abutment
ra max.0.3 mm Radius of shaft or housing fillet

Calculation data
Basic dynamic load rating C 4.94 kN
Basic static load rating C0 3.15 kN
Fatigue load limit Pu 0.137 kN
Limiting speed 13 000 r/min
Minimum load factor kr 0.03
Calculation factor f0 14.1

Mass
Mass bearing 0.038 kg

SKFHere at Bearing King we offer the full range of SKF products including ball, self-aligning, angular contact, cylindrical, needle and spherical bearings at highly competitive prices which are available for same or next day delivery