{"title":"Taper Bushes","description":"\u003cp\u003eTaper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process. They are available with both metric or imperial bore and keyway size options. Taper bushes are designed for use with v pulleys, chain sprockets, micro v pulleys, timing belt pulleys, couplings, weld on \u0026amp; bolt on hubs. Part numbers are identified by a 4 digit number (eg 1610) which represents the taper bush series followed by the bore size (eg 28mm) for example 1610x28mm \u003c\/p\u003e","products":[{"product_id":"1008-10-taper-locking-bush-10mm-bore","title":"1008-10 Taper Locking Bush 10mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 10mm\u003cbr\u003e\n\nKeyway width: 3mm\u003cbr\u003e\n\nKeyway depth: 1.4mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 5.6\u003cbr\u003e\n\nScrew size (BSW): 1\/4 inch, hex, socket size: 3mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 35.0mm\u003cbr\u003e\n\nBush length: 22.3mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.1kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40921735856218,"sku":"1008-10","price":3.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146188.jpg?v=1713273211"},{"product_id":"1108-9-taper-locking-bush-9mm-bore","title":"1108-9 Taper Locking Bush 9mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 9mm\u003cbr\u003e\n\nKeyway width: 3mm\u003cbr\u003e\n\nKeyway depth: 1.4mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 5.6\u003cbr\u003e\n\nScrew size (BSW): 1\/4 inch, hex, socket size: 3mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 38.0mm\u003cbr\u003e\n\nBush length: 22.3mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.1kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40921739788378,"sku":"1108-9","price":4.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146272.jpg?v=1713273255"},{"product_id":"1210-11-taper-locking-bush-11mm-bore","title":"1210-11 Taper Locking Bush 11mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 11mm\u003cbr\u003e\n\nKeyway width: 4mm\u003cbr\u003e\n\nKeyway depth: 1.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 47.5mm\u003cbr\u003e\n\nBush length: 25.4mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.2kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40921740673114,"sku":"1210-11","price":5.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146442.jpg?v=1713273267"},{"product_id":"1610-14-taper-locking-bush-14mm-bore","title":"1610-14 Taper Locking Bush 14mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 14mm \u003cbr\u003e\n\nKeyway width: 5mm\u003cbr\u003e\n\nKeyway depth: 2.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 25.4mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.3kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009010266,"sku":"1610-14","price":6.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146728.jpg?v=1713279660"},{"product_id":"1615-14-taper-locking-bush-14mm-bore","title":"1615-14 Taper Locking Bush 14mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 14mm\u003cbr\u003e\n\nKeyway width: 5mm\u003cbr\u003e\n\nKeyway depth: 2.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009043034,"sku":"1615-14","price":6.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146790.jpg?v=1713279662"},{"product_id":"1615-16-taper-locking-bush-16mm-bore","title":"1615-16 Taper Locking Bush 16mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 16mm\u003cbr\u003e\n\nKeyway width: 5mm\u003cbr\u003e\n\nKeyway depth: 2.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009075802,"sku":"1615-16","price":6.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146796.jpg?v=1713279664"},{"product_id":"1615-18-taper-locking-bush-18mm-bore","title":"1615-18 Taper Locking Bush 18mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 18mm\u003cbr\u003e\n\nKeyway width: 6mm\u003cbr\u003e\n\nKeyway depth: 2.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009108570,"sku":"1615-18","price":6.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146798.jpg?v=1713279665"},{"product_id":"1615-19-taper-locking-bush-19mm-bore","title":"1615-19 Taper Locking Bush 19mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 19mm\u003cbr\u003e\n\nKeyway width: 6mm\u003cbr\u003e\n\nKeyway depth: 2.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009141338,"sku":"1615-19","price":6.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146800.jpg?v=1713279665"},{"product_id":"1615-20-taper-locking-bush-20mm-bore","title":"1615-20 Taper Locking Bush 20mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 20mm\u003cbr\u003e\n\nKeyway width: 6mm\u003cbr\u003e\n\nKeyway depth: 2.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009174106,"sku":"1615-20","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146802.jpg?v=1713279668"},{"product_id":"1615-22-taper-locking-bush-22mm-bore","title":"1615-22 Taper Locking Bush 22mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 22mm\u003cbr\u003e\n\nKeyway width: 6mm\u003cbr\u003e\n\nKeyway depth: 2.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009206874,"sku":"1615-22","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146804.jpg?v=1713279669"},{"product_id":"1615-24-taper-locking-bush-24mm-bore","title":"1615-24 Taper Locking Bush 24mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 24mm\u003cbr\u003e\n\nKeyway width: 8\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -1.3\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009239642,"sku":"1615-24","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146806.jpg?v=1713279671"},{"product_id":"1615-25-taper-locking-bush-25mm-bore","title":"1615-25 Taper Locking Bush 25mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 25mm\u003cbr\u003e\n\nKeyway width: 8\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -1.3\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009272410,"sku":"1615-25","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146808.jpg?v=1713279672"},{"product_id":"1615-28-taper-locking-bush-28mm-bore","title":"1615-28 Taper Locking Bush 28mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 28mm\u003cbr\u003e\n\nKeyway width: 8mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -1.3\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009305178,"sku":"1615-28","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146810.jpg?v=1713279673"},{"product_id":"1615-30-taper-locking-bush-30mm-bore","title":"1615-30 Taper Locking Bush 30mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 30mm\u003cbr\u003e\n\nKeyway width: 8\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009337946,"sku":"1615-30","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146814.jpg?v=1713279675"},{"product_id":"1615-32-taper-locking-bush-32mm-bore","title":"1615-32 Taper Locking Bush 32mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 32mm\u003cbr\u003e\n\nKeyway width: 10mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009370714,"sku":"1615-32","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146816.jpg?v=1713279676"},{"product_id":"1615-35-taper-locking-bush-35mm-bore","title":"1615-35 Taper Locking Bush 35mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 35mm\u003cbr\u003e\n\nKeyway width: 10\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009403482,"sku":"1615-35","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146818.jpg?v=1713279677"},{"product_id":"1615-38-taper-locking-bush-38mm-bore","title":"1615-38 Taper Locking Bush 38mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 38mm\u003cbr\u003e\n\nKeyway width: 10\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 20\u003cbr\u003e\n\nScrew size (BSW): 3\/8 inch, hex, socket size: 5mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 57.0mm\u003cbr\u003e\n\nBush length: 38.1mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.5kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009436250,"sku":"1615-38","price":6.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146820.jpg?v=1713279678"},{"product_id":"3030-35-taper-locking-bush-35mm-bore","title":"3030-35 Taper Locking Bush 35mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 35mm\u003cbr\u003e\n\nKeyway width: 10mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009567322,"sku":"3030-35","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147100.jpg?v=1713279681"},{"product_id":"3030-38-taper-locking-bush-38mm-bore","title":"3030-38 Taper Locking Bush 38mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 38mm\u003cbr\u003e\n\nKeyway width: 10mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009600090,"sku":"3030-38","price":21.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147102.jpg?v=1713279681"},{"product_id":"3030-40-taper-locking-bush-40mm-bore","title":"3030-40 Taper Locking Bush 40mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 40mm\u003cbr\u003e\n\nKeyway width: 12mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009632858,"sku":"3030-40","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147104.jpg?v=1713279683"},{"product_id":"3030-45-taper-locking-bush-45mm-bore","title":"3030-45 Taper Locking Bush 45mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 45mm\u003cbr\u003e\n\nKeyway width: 14mm\u003cbr\u003e\n\nKeyway depth: 3.8mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009665626,"sku":"3030-45","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147108.jpg?v=1713279683"},{"product_id":"3030-48-taper-locking-bush-48mm-bore","title":"3030-48 Taper Locking Bush 48mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 48mm\u003cbr\u003e\n\nKeyway width: 14mm\u003cbr\u003e\n\nKeyway depth: 3.8mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009895002,"sku":"3030-48","price":21.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147110.jpg?v=1713279686"},{"product_id":"3030-50-taper-locking-bush-50mm-bore","title":"3030-50 Taper Locking Bush 50mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 50mm\u003cbr\u003e\n\nKeyway width: 14mm\u003cbr\u003e\n\nKeyway depth: 3.8mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009927770,"sku":"3030-50","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147112.jpg?v=1713279686"},{"product_id":"3030-55-taper-locking-bush-55mm-bore","title":"3030-55 Taper Locking Bush 55mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 55mm\u003cbr\u003e\n\nKeyway width: 16mm\u003cbr\u003e\n\nKeyway depth: 4.3mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009960538,"sku":"3030-55","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147114.jpg?v=1713279688"},{"product_id":"3030-60-taper-locking-bush-60mm-bore","title":"3030-60 Taper Locking Bush 60mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 60mm\u003cbr\u003e\n\nKeyway width: 18mm\u003cbr\u003e\n\nKeyway depth: 4.4mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922009993306,"sku":"3030-60","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147116.jpg?v=1713279688"},{"product_id":"3030-70-taper-locking-bush-70mm-bore","title":"3030-70 Taper Locking Bush 70mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 70mm\u003cbr\u003e\n\nKeyway width: 20mm\u003cbr\u003e\n\nKeyway depth: 4.9mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010091610,"sku":"3030-70","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147120.jpg?v=1713279691"},{"product_id":"3030-65-taper-locking-bush-65mm-bore","title":"3030-65 Taper Locking Bush 65mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 65mm\u003cbr\u003e\n\nKeyway width: 18mm\u003cbr\u003e\n\nKeyway depth: 4.4mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010124378,"sku":"3030-65","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147118.jpg?v=1713279691"},{"product_id":"3030-75-taper-locking-bush-75mm-bore","title":"3030-75 Taper Locking Bush 75mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 75mm\u003cbr\u003e\n\nKeyway width: 20mm\u003cbr\u003e\n\nKeyway depth: 4.9mm\u003cbr\u003e\n\nShallow keyway depth: - \u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 76.2mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.8kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010157146,"sku":"3030-75","price":23.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147122.jpg?v=1713279693"},{"product_id":"3020-25-taper-locking-bush-25mm-bore","title":"3020-25 Taper Locking Bush 25mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 25mm\u003cbr\u003e\n\nKeyway width: 8mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: 1.3\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010320986,"sku":"3020-25","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147024.jpg?v=1713279694"},{"product_id":"3020-28-taper-locking-bush-28mm-bore","title":"3020-28 Taper locking Bush 28mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 28mm\u003cbr\u003e\n\nKeyway width: 8mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: 1.3\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010353754,"sku":"3020-28","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147026.jpg?v=1713279697"},{"product_id":"3020-30-taper-locking-bush-30mm-bore","title":"3020-30 Taper Locking Bush 30mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 30mm\u003cbr\u003e\n\nKeyway width: 8mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010386522,"sku":"3020-30","price":19.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147030.jpg?v=1713279697"},{"product_id":"3020-32-taper-locking-bush-32mm-bore","title":"3020-32 Taper Locking Bush 32mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 32mm\u003cbr\u003e\n\nKeyway width: 10mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010583130,"sku":"3020-32","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147032.jpg?v=1713279698"},{"product_id":"3020-35-taper-locking-bush-35mm-bore","title":"3020-35 Taper Locking Bush 35mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 35mm\u003cbr\u003e\n\nKeyway width: 10mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010648666,"sku":"3020-35","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147034.jpg?v=1713279699"},{"product_id":"3020-38-taper-locking-bush-38mm-bore","title":"3020-38 Taper Locking Bush 38mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 38mm\u003cbr\u003e\n\nKeyway width: 10mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010681434,"sku":"3020-38","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147036.jpg?v=1713279702"},{"product_id":"3020-40-taper-locking-bush-40mm-bore","title":"3020-40 Taper Locking Bush 40mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 40mm\u003cbr\u003e\n\nKeyway width: 12mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010714202,"sku":"3020-40","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147038.jpg?v=1713279701"},{"product_id":"3020-42-taper-locking-bush-42mm-bore","title":"3020-42 Taper Locking Bush 42mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 42mm\u003cbr\u003e\n\nKeyway width: 12mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: 2.2\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010746970,"sku":"3020-42","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147040.jpg?v=1713279704"},{"product_id":"3020-45-taper-locking-bush-45mm-bore","title":"3020-45 Taper Locking Bush 45mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 45mm\u003cbr\u003e\n\nKeyway width: 14mm\u003cbr\u003e\n\nKeyway depth: 3.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010779738,"sku":"3020-45","price":17.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147042.jpg?v=1713279704"},{"product_id":"3020-48-taper-locking-bush-48mm-bore","title":"3020-48 Taper Locking Bush 48mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 48mm\u003cbr\u003e\n\nKeyway width: 14mm\u003cbr\u003e\n\nKeyway depth: 3.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010845274,"sku":"3020-48","price":17.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147044.jpg?v=1713279706"},{"product_id":"3020-50-taper-locking-bush-50mm-bore","title":"3020-50 Taper Locking Bush 50mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 50mm\u003cbr\u003e\n\nKeyway width: 14mm\u003cbr\u003e\n\nKeyway depth: 3.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010878042,"sku":"3020-50","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147046.jpg?v=1713279707"},{"product_id":"3020-55-taper-locking-bush-55mm-bore","title":"3020-55 Taper Locking Bush 55mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 55mm\u003cbr\u003e\n\nKeyway width: 16mm\u003cbr\u003e\n\nKeyway depth: 4.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010943578,"sku":"3020-55","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147048.jpg?v=1713279709"},{"product_id":"3020-60-taper-locking-bush-60mm-bore","title":"3020-60 Taper Locking Bush 60mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 60mm\u003cbr\u003e\n\nKeyway width: 18mm\u003cbr\u003e\n\nKeyway depth: 4.4mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922010976346,"sku":"3020-60","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147050.jpg?v=1713279710"},{"product_id":"3020-65-taper-locking-bush-65mm-bore","title":"3020-65 Taper Locking Bush 65mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 65mm\u003cbr\u003e\n\nKeyway width: 18mm\u003cbr\u003e\n\nKeyway depth: 4.4mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011041882,"sku":"3020-65","price":18.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147052.jpg?v=1713279712"},{"product_id":"3020-70-taper-locking-bush-70mm-bore","title":"3020-70 Taper Locking Bush 70mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 70mm\u003cbr\u003e\n\nKeyway width: 20mm\u003cbr\u003e\n\nKeyway depth: 4.9mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011074650,"sku":"3020-70","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147054.jpg?v=1713279712"},{"product_id":"3020-75-taper-locking-bush-75mm-bore","title":"3020-75 Taper Locking Bush 75mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 75mm\u003cbr\u003e\n\nKeyway width: 20mm\u003cbr\u003e\n\nKeyway depth: 4.9mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 90\u003cbr\u003e\n\nScrew size (BSW): 5\/8 inch, hex, socket size: 8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 108mm\u003cbr\u003e\n\nBush length: 50.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 3.6kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011140186,"sku":"3020-75","price":17.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/147056.jpg?v=1713279714"},{"product_id":"2012-14-taper-locking-bush-14mm-bore","title":"2012-14 Taper Locking Bush 14mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 14mm\u003cbr\u003e\n\nKeyway width: 5mm\u003cbr\u003e\n\nKeyway depth: 2.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 30\u003cbr\u003e\n\nScrew size (BSW): 7\/16 inch, hex, socket size: 6mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 70.0mm\u003cbr\u003e\n\nBush length: 31.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.7kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011172954,"sku":"2012-14","price":7.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146854.jpg?v=1713279715"},{"product_id":"2012-16-taper-locking-bush-16mm-bore","title":"2012-16 Taper Locking Bush 16mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 16mm\u003cbr\u003e\n\nKeyway width: 5mm\u003cbr\u003e\n\nKeyway depth: 2.3mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 30\u003cbr\u003e\n\nScrew size (BSW): 7\/16 inch, hex, socket size: 6mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 70.0mm\u003cbr\u003e\n\nBush length: 31.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.7kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011205722,"sku":"2012-16","price":7.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146858.jpg?v=1713279717"},{"product_id":"2012-18-taper-locking-bush-18mm-bore","title":"2012-18 Taper Locking Bush 18mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 18mm\u003cbr\u003e\n\nKeyway width: 6mm\u003cbr\u003e\n\nKeyway depth: 2.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 30\u003cbr\u003e\n\nScrew size (BSW): 7\/16 inch, hex, socket size: 6mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 70.0mm\u003cbr\u003e\n\nBush length: 31.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.7kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011238490,"sku":"2012-18","price":7.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146860.jpg?v=1713279717"},{"product_id":"2012-19-taper-locking-bush-19mm-bore","title":"2012-19 Taper Locking Bush 19mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 19mm\u003cbr\u003e\n\nKeyway width: 6mm\u003cbr\u003e\n\nKeyway depth: 2.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 30\u003cbr\u003e\n\nScrew size (BSW): 7\/16 inch, hex, socket size: 6mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 70.0mm\u003cbr\u003e\n\nBush length: 31.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.7kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011271258,"sku":"2012-19","price":7.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146862.jpg?v=1713279719"},{"product_id":"2012-20-taper-locking-bush-20mm-bore","title":"2012-20 Taper Locking Bush 20mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 20mm\u003cbr\u003e\n\nKeyway width: 6mm\u003cbr\u003e\n\nKeyway depth: 2.8mm\u003cbr\u003e\n\nShallow keyway depth: -\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 30\u003cbr\u003e\n\nScrew size (BSW): 7\/16 inch, hex, socket size: 6mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 70.0mm\u003cbr\u003e\n\nBush length: 31.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.7kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011336794,"sku":"2012-20","price":7.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146866.jpg?v=1713279720"},{"product_id":"2012-24-taper-locking-bush-24mm-bore","title":"2012-24 Taper Locking Bush 24mm Bore","description":"Taper bushes are the most convenient and cost effective method of fixing components to a mating shaft without using any special tools. Taper bushes are pre-machined with the required bore \u0026amp; keyway size and are supplied complete with locking set screws, thus making savings in time and cost on any machining process.\u003cbr\u003e\n\n\u003cbr\u003e\n\nBore dia: 24mm\u003cbr\u003e\n\nKeyway width: 8mm\u003cbr\u003e\n\nKeyway depth: 3.3mm\u003cbr\u003e\n\nShallow keyway depth: - 1.3\u003cbr\u003e\n\n\u003cbr\u003e\n\nScrew tightening torque (Nm): 30\u003cbr\u003e\n\nScrew size (BSW): 7\/16 inch, hex, socket size: 6mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nLarge end dia: 70.0mm\u003cbr\u003e\n\nBush length: 31.8mm\u003cbr\u003e\n\n\u003cbr\u003e\n\nMass: 0.7kg\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Install:\u003cbr\u003e\n\n1. Clean shaft, bore and outside of bush, and bore of hub. Remove any oil, laquer or dirt, Place bush in hub and match half holes to make complete holes (each complete hole will be threaded on one side only).\u003cbr\u003e\n\n2. Lightly oil thread and point of set screws, or thread and under head of cap screws. Place screws loosely in holes that are threaded on hub side.\u003cbr\u003e\n\n3. Make sure bush is free in hub. slip assembly onto shaft and locate in the desired position.\u003cbr\u003e\n\n4. Tighten screws alternately and evenly until all are pulled up tightly\u003cbr\u003e\n\n5. Hammer against large end of bush using hammer and block or sleeve to avoid damage. Screws can now be turned a little more to the specified torque setting. repeat this alternate hammering and screw re-tightening until the specified torque is reached. Fill all holes with grease to exclude dirt.\u003cbr\u003e\n\n\u003cbr\u003e\n\nTo Remove:\u003cbr\u003e\n\n1. Remove all screws. Lightly oil thread and point of set screws, or thread and under head of cap screws.\u003cbr\u003e\n\n2. Insert screws into removed holes that are threaded on the bush side. In sizes where washers are found under screw heads, be sure to use the washers.\u003cbr\u003e\n\n3. Tighten screws alternately until bush is loosened in the hub and then remove the complete assembly. If bush does not loosen immediately, tap on hub.","brand":"BKL Brand","offers":[{"title":"Default Title","offer_id":40922011402330,"sku":"2012-24","price":7.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/files\/146870.jpg?v=1713279722"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0588\/9684\/2842\/collections\/42885.jpg?v=1736350240","url":"https:\/\/bearing-king.co.uk\/collections\/taper-bushes.oembed?page=14","provider":"Bearing King","version":"1.0","type":"link"}