15-2 Kukko Separator for Pulling 22-125mm
For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks. Min pulling dia 22mm, max pulling dia 115mm
Regular price
£170.83
inc.VAT
£142.36 exc.VAT
FREE UK MAINLAND DELIVERY ON ORDERS OVER £50
Couldn't load pickup availability
Description
The separators of the 15 series are used together with the extractors of the 18 series for extracting ball bearings, roller bearings, inner rings and other parts lying flat in trade, industry and workshops when there is not enough space for extractors. The separating-pulling process is able to separate those parts gently before they can be pulled off from the outside.
Range of Application
Together with the extractors of series 18 for extracting ball bearings, roller bearings, inner rings and other parts lying flat
Benefit
The sharp cutting edges allow peeling where other types of peeling are inapplicable
The screw connection of separator and extractor ensures the highest stability during extraction
If the separating jaws are screwed into the extractor the other way round, the contact surface is enlarged and extracted more gently
Operation
Press the sharp cutting edges of the separator behind the part
Clamp the cut-off jaws with the aid of the pressure spindle by evenly tightening the adjusting nuts on the side bolts of the cutoff device and make sure that the cut-off blades are seated up to the stop under the part to be removed
Screw the pullers pull bolts into the threaded holes of the separator as far as they will go
Hold the separating device and pull the part off safely and carefully by tightening the clamping nut
Master Data
GTIN 4021176007118
Country of origin DE
Material
Series 15
Net weight [kg] 2,9 kg
Gross weight [kg]
Package contents 1 piece
Packaging material Carton 15-2 green
Spare Parts
015210_Side bolt with nut
The separators of the 15 series are used together with the extractors of the 18 series for extracting ball bearings, roller bearings, inner rings and other parts lying flat in trade, industry and workshops when there is not enough space for extractors. The separating-pulling process is able to separate those parts gently before they can be pulled off from the outside.
Range of Application
Together with the extractors of series 18 for extracting ball bearings, roller bearings, inner rings and other parts lying flat
Benefit
The sharp cutting edges allow peeling where other types of peeling are inapplicable
The screw connection of separator and extractor ensures the highest stability during extraction
If the separating jaws are screwed into the extractor the other way round, the contact surface is enlarged and extracted more gently
Operation
Press the sharp cutting edges of the separator behind the part
Clamp the cut-off jaws with the aid of the pressure spindle by evenly tightening the adjusting nuts on the side bolts of the cutoff device and make sure that the cut-off blades are seated up to the stop under the part to be removed
Screw the pullers pull bolts into the threaded holes of the separator as far as they will go
Hold the separating device and pull the part off safely and carefully by tightening the clamping nut
Master Data
GTIN 4021176007118
Country of origin DE
Material
Series 15
Net weight [kg] 2,9 kg
Gross weight [kg]
Package contents 1 piece
Packaging material Carton 15-2 green
Spare Parts
015210_Side bolt with nut