Home » 16011 FAG Open Deep Groove Ball Bearing 55x90x11mm
Single row deep open ball bearing. 55mm inside x 90mm outside x 11mm width
Single row deep open ball bearing. 55mm inside x 90mm outside x 11mm width
Single row deep open ball bearing. 55mm inside x 90mm outside x 11mm width
Single row deep open ball bearing. 55mm inside x 90mm outside x 11mm width

16011 FAG Open Deep Groove Ball Bearing 55x90x11mm

In stock
SKU: 16011-FAG
Single row deep open ball bearing. 55mm inside x 90mm outside x 11mm width
£26.33 inc.VAT
£21.94 exc.VAT
FREE UK MAINLAND DELIVERY ON ORDERS OVER £50

Product details

  • Vendor FAG
  • SKU 16011-FAG
  • Inside diameter (d) 55mm
  • Outside diameter (D) 90mm
  • Width (B) 11mm
Description Delivery Returns
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Principal Dimensions
Inside diameter: 55mm
Outside diameter: 90mm
Width: 11mm

Basic Load Ratings
Dynamic: 19.3kn
Static: 16.3kn

Speed Ratings
Reference speed:
10,900 r/min
Limiting speed: 6,000 r/min