6016NR NTN Open Deep Groove Ball Bearing with Circlip Groove and Circlip 80x125x22mm
Single row deep groove ball bearing with circlip groove and circlip. 80mm inside x 125mm outside x 22mm width
Regular price
From
£59.50
£49.58 exc.VAT
Couldn't load pickup availability
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
d - Internal diameter 80 mm
D - External diameter 125 mm
B - Bearing/Inner ring width 22 mm
a min - Min position Groove 2,67 mm
a max - Max position groove 2,87 mm
rs - Min fillet radius 1,1 mm
rNs - Min fillet radius 0,5 mm
D3 - Max bottom groove diameter 120,22 mm
b min - Min groove width 3,1 mm
b max - Max groove width 3,4 mm
r0 max - Max bottom groove radius 0,6 mm
D4 max - Max outer diameter of assembled stop ring 134,7 mm
f - Stop ring thickness 2,82 mm
Snap ring reference R125
Radial clearance class CN
Mass 0,854 kg
PRODUCT PERFORMANCE
C - Dynamic load 53 kN
C0 - Static load 40 kN
Cu - Fatigue limit load 2,91 kN
f0 - Coefficient 15.6
Nlim - Oil lubrication limit speed 6200 tr/min
Nlim - Grease lubrication limit speed 5300 tr/min
Tmin - Min operating temperature -40 C
Tmax - Max operating temperature 120 C
ABUTMENT
da min - Min shoulder diameter IR 86,5 mm
Da max - Max shoulder diameter OR 118,5 mm
ra max - Max shaft & housing fillet radius 1 mm
rNa max - Max fillet radius on segment side 0,5 mm
Ca min - Mini segment position 5,49 mm
Ca max - Max segment position 5,69 mm
Db min - Min stop ring position diameter 136,5 mm
NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
d - Internal diameter 80 mm
D - External diameter 125 mm
B - Bearing/Inner ring width 22 mm
a min - Min position Groove 2,67 mm
a max - Max position groove 2,87 mm
rs - Min fillet radius 1,1 mm
rNs - Min fillet radius 0,5 mm
D3 - Max bottom groove diameter 120,22 mm
b min - Min groove width 3,1 mm
b max - Max groove width 3,4 mm
r0 max - Max bottom groove radius 0,6 mm
D4 max - Max outer diameter of assembled stop ring 134,7 mm
f - Stop ring thickness 2,82 mm
Snap ring reference R125
Radial clearance class CN
Mass 0,854 kg
PRODUCT PERFORMANCE
C - Dynamic load 53 kN
C0 - Static load 40 kN
Cu - Fatigue limit load 2,91 kN
f0 - Coefficient 15.6
Nlim - Oil lubrication limit speed 6200 tr/min
Nlim - Grease lubrication limit speed 5300 tr/min
Tmin - Min operating temperature -40 C
Tmax - Max operating temperature 120 C
ABUTMENT
da min - Min shoulder diameter IR 86,5 mm
Da max - Max shoulder diameter OR 118,5 mm
ra max - Max shaft & housing fillet radius 1 mm
rNa max - Max fillet radius on segment side 0,5 mm
Ca min - Mini segment position 5,49 mm
Ca max - Max segment position 5,69 mm
Db min - Min stop ring position diameter 136,5 mm