6205NRC3 NTN Open Deep Groove Ball Bearing with Circlip Groove and Circlip 25x52x15mm
Single row deep groove ball bearing with circlip groove and circlip and C3 Clearance. 25mm inside x 52mm outside x 15mm width
Regular price
From
£10.78
£8.98 exc.VAT
Couldn't load pickup availability
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
d - Internal diameter 25 mm
D - External diameter 52 mm
B - Bearing/Inner ring width 15 mm
a min - Min position Groove 2,31 mm
a max - Max position groove 2,46 mm
rs - Min fillet radius 1 mm
rNs - Min fillet radius 0,5 mm
D3 - Max bottom groove diameter 49,73 mm
b min - Min groove width 1,35 mm
b max - Max groove width 1,65 mm
r0 max - Max bottom groove radius 0,4 mm
D4 max - Max outer diameter of assembled stop ring 57,9 mm
f - Stop ring thickness 1,12 mm
Snap ring reference R52
Radial clearance class CN
Mass 0,128 kg
PRODUCT PERFORMANCE
C - Dynamic load 15,5 kN
C0 - Static load 7,85 kN
Cu - Fatigue limit load 0,55 kN
f0 - Coefficient 13.9
Nlim - Oil lubrication limit speed 15000 tr/min
Nlim - Grease lubrication limit speed 13000 tr/min
Tmin - Min operating temperature -40 C
Tmax - Max operating temperature 120 C
ABUTMENT
da min - Min shoulder diameter IR 30 mm
Da max - Max shoulder diameter OR 47 mm
ra max - Max shaft & housing fillet radius 1 mm
rNa max - Max fillet radius on segment side 0,5 mm
Ca min - Mini segment position 3,33 mm
Ca max - Max segment position 3,58 mm
Db min - Min stop ring position diameter 58,5 mm
NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
d - Internal diameter 25 mm
D - External diameter 52 mm
B - Bearing/Inner ring width 15 mm
a min - Min position Groove 2,31 mm
a max - Max position groove 2,46 mm
rs - Min fillet radius 1 mm
rNs - Min fillet radius 0,5 mm
D3 - Max bottom groove diameter 49,73 mm
b min - Min groove width 1,35 mm
b max - Max groove width 1,65 mm
r0 max - Max bottom groove radius 0,4 mm
D4 max - Max outer diameter of assembled stop ring 57,9 mm
f - Stop ring thickness 1,12 mm
Snap ring reference R52
Radial clearance class CN
Mass 0,128 kg
PRODUCT PERFORMANCE
C - Dynamic load 15,5 kN
C0 - Static load 7,85 kN
Cu - Fatigue limit load 0,55 kN
f0 - Coefficient 13.9
Nlim - Oil lubrication limit speed 15000 tr/min
Nlim - Grease lubrication limit speed 13000 tr/min
Tmin - Min operating temperature -40 C
Tmax - Max operating temperature 120 C
ABUTMENT
da min - Min shoulder diameter IR 30 mm
Da max - Max shoulder diameter OR 47 mm
ra max - Max shaft & housing fillet radius 1 mm
rNa max - Max fillet radius on segment side 0,5 mm
Ca min - Mini segment position 3,33 mm
Ca max - Max segment position 3,58 mm
Db min - Min stop ring position diameter 58,5 mm