6206LLUNR-5K NTN Sealed Deep Groove Ball Bearing with Circlip Groove and Circlip 30x62x16mm
Single row deep groove ball bearing with circlip groove and circlip. 30mm inside x 62mm outside x 16mm width
Regular price
From
£14.94
£12.45 exc.VAT
Couldn't load pickup availability
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
d - Internal diameter 30 mm
D - External diameter 62 mm
B - Bearing/Inner ring width 16 mm
a min - Min position Groove 3,07 mm
a max - Max position groove 3,28 mm
rs - Min fillet radius 1 mm
rNs - Min fillet radius 0,5 mm
D3 - Max bottom groove diameter 59,61 mm
b min - Min groove width 1,9 mm
b max - Max groove width 2,2 mm
r0 max - Max bottom groove radius 0,6 mm
D4 max - Max outer diameter of assembled stop ring 67,7 mm
f - Stop ring thickness 1,7 mm
Snap ring reference R62
Radial clearance class CN
Mass 0,199 kg
PRODUCT PERFORMANCE
C - Dynamic load 21,6 kN
C0 - Static load 11,3 kN
Cu - Fatigue limit load 0,795 kN
f0 - Coefficient 13.8
Nlim - Grease lubrication limit speed 7300 tr/min
Tmin - Min operating temperature -25 C
Tmax - Max operating temperature 110 C
ABUTMENT
da min - Min shoulder diameter IR 35 mm
da max - Max shoulder diameter IR 39 mm
Da max - Max shoulder diameter OR 57 mm
ra max - Max shaft & housing fillet radius 1 mm
rNa max - Max fillet radius on segment side 0,5 mm
Ca min - Mini segment position 4,67 mm
Ca max - Max segment position 4,98 mm
Db min - Min stop ring position diameter 68,5 mm
NTN are a leading Japanese Bearing Manufacturer widely used around the world due to their exceptional durability and quality.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.
d - Internal diameter 30 mm
D - External diameter 62 mm
B - Bearing/Inner ring width 16 mm
a min - Min position Groove 3,07 mm
a max - Max position groove 3,28 mm
rs - Min fillet radius 1 mm
rNs - Min fillet radius 0,5 mm
D3 - Max bottom groove diameter 59,61 mm
b min - Min groove width 1,9 mm
b max - Max groove width 2,2 mm
r0 max - Max bottom groove radius 0,6 mm
D4 max - Max outer diameter of assembled stop ring 67,7 mm
f - Stop ring thickness 1,7 mm
Snap ring reference R62
Radial clearance class CN
Mass 0,199 kg
PRODUCT PERFORMANCE
C - Dynamic load 21,6 kN
C0 - Static load 11,3 kN
Cu - Fatigue limit load 0,795 kN
f0 - Coefficient 13.8
Nlim - Grease lubrication limit speed 7300 tr/min
Tmin - Min operating temperature -25 C
Tmax - Max operating temperature 110 C
ABUTMENT
da min - Min shoulder diameter IR 35 mm
da max - Max shoulder diameter IR 39 mm
Da max - Max shoulder diameter OR 57 mm
ra max - Max shaft & housing fillet radius 1 mm
rNa max - Max fillet radius on segment side 0,5 mm
Ca min - Mini segment position 4,67 mm
Ca max - Max segment position 4,98 mm
Db min - Min stop ring position diameter 68,5 mm