Home » 6218NR SKF Open Deep Groove Ball Bearing with Circlip Groove and Circlip 90x160x30mm

6218NR SKF Open Deep Groove Ball Bearing with Circlip Groove and Circlip 90x160x30mm

In stock
SKU: 6218NR-SKF
SKF Single row deep groove ball bearing with circlip and circlip groove 90mm inside x 160mm outside x 30mm width
£168.71 inc.VAT
£140.59 exc.VAT
FREE UK MAINLAND DELIVERY ON ORDERS OVER £50

Product details

  • Vendor SKF
  • SKU 6218NR-SKF
  • Inside diameter (d) 90mm
  • Outside diameter (D) 160mm
  • Width (B) 30mm
Description Delivery Returns
SKF Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.

Principal Dimensions
Inside diameter d: 90mm
Outside diameter B: 160mm
Width D: 30mm

Basic Load Ratings
Dynamic: 101kn
Static: 73,5kn

Speed Ratings
Reference speed: 8500 r/min
Limiting speed: 5300 r/min

Dimensions mm
d: 90mm
D: 160mm
B: 30mm
d1: 113mm
D2: 138mm
D3: 155.22mm
D4: 169.7mm
b: 3.1mm
C: 4.9mm
f: 2.82mm
r0 max.0.6mm
r1,2 min.2mm