HK5025 INA Drawn Cup Needle Roller Bearing 50x58x25mm
INA Drawn cup type needle roller bearing with open end 50mm Inside x 58mm outside x 25mm wide
Regular price
£11.92
inc.VAT
£9.93 exc.VAT
FREE UK MAINLAND DELIVERY ON ORDERS OVER £50
Couldn't load pickup availability
Due to the thin-walled outer cup and the design without an inner ring, drawn cup needle roller bearings have extremely small radial dimensions. They have high load carrying capacity, are suitable for high speeds and are particularly easy to fit. If axial means of location such as shoulders, snap rings etc. are not used, the housing bore can be produced easily and particularly economically.
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings.
Dimensions
Fw: 50mm
D: 58mm
C: 25mm
r min: 0.8mm
Basic dynamic load rating, radial: 38500 N
Basic static load rating, radial: 84000 N
Fatigue limit load, radial: 11700 N
Limiting speed: 5200 1/min
Reference speed: 3900 1/min
Mass: 90.0g
Suitable Inner Rings: LR45X50X25.5 IR45X50X25.5
Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft. If the shaft cannot be used as a raceway, they can be combined with inner rings.
Dimensions
Fw: 50mm
D: 58mm
C: 25mm
r min: 0.8mm
Basic dynamic load rating, radial: 38500 N
Basic static load rating, radial: 84000 N
Fatigue limit load, radial: 11700 N
Limiting speed: 5200 1/min
Reference speed: 3900 1/min
Mass: 90.0g
Suitable Inner Rings: LR45X50X25.5 IR45X50X25.5