RCK80-25x34 Challenge Cone Clamping Element 25x34mm
Couldn't load pickup availability
Product details
- Vendor Challenge
- SKU RF02-25X34-CHALLENGE
- Inside diameter (d) 25mm
Cone clamping elements are a purely friction method of clamping components to a shaft. The internal components within a cone clamp operate on a taper, so as the cone clamp is tightened the internal diameter decreases while the outside diameter increases. This change in diameters creates the clamping force.
There are two main advantages of cone clamps. The first is that for machining your component (i.e. a sprocket), the bore needs to be plain rather than being keyed or tapped and tapered. The second advantage is that the cone clamp acts as an overload protector, with excessive loading causing the clamp to spin on the shaft.Available for shaft diameters down to 6mm, these cone clamping elements are designed to fit into small diameter hubs, particularly suited to light duty, light torque applications. A spacer ring prevents axial movement during clampin and design ensures good levels of concentricity. For correct operation of these units, the hub diameter should not be less than the flange diameter D2, even though with many materials stress limits would allow selection of smaller hub diameters.
Cross Reference Guide:- Tollok: TLK110, Bikon: 8000, Bonfix: CCE1000, Chiaravalli: RCK80, Compomac: Conex B, Fenlock: FLK110, Italblock: CN55, Kana: N/A, Kinlok: LOK10, Clampex KTR: KTR250, MAV: 5061, Poggi: CAL-B, Ringblok: 1100, Ringfeder: RFN7110, Ringspann: RLK110, SIT: Type 3, TAS-Schafer: N/A, Tsubaki Power-Lock: TF, VBlok: VK800B
To Install
1 Ensure the hub and shaft surfaces are clean and degreased.
2 Apply a thin coating of light machine oil to screw threads and conical surfaces (do not use any molybdenum disulphide based or E.P. oils).
3 Loosely assemble the clamping element into the required position and tighten the clamping screws in diagonal sequence to the requisite torque, Ts.
4 If the application is subject to corrosive environmental conditions, apply grease to protect screw heads etc.
To Remove
1 Loosen all of the clamping screws in the same diagonal sequence as assembly.
2 The clamping element should now self release.
3 If necessary, tap the screws lightly with a soft hammer.
4 If the clamping element tapers still don't release, remove some of the bolts and insert them into threaded removal holes.
5 Tighten them sequentially to break the clamping ring cone tapers.
6 Lubricate all screws with a light machine oil for the future use of the Challenge Cone Clamping Element.
Dimensions
d: 25mm
D: 34mm
L1: 25mm
L2: 38mm
L3: 45mm
L: 51mm
D2: 56mm
D1: 50mm
Transmission
Torque Mt: 302Nm
Axial Force Ft: 21.0kN
Contact Pressure
Shaft P: 99.3 N/mm2
Hub P1: 73.0 N/mm2
Locking Screws
Qty: 4
Size: M6x18
Tightening Torque Ts: 17.0Nm
Spend over £100 (excl VAT) and your Shipping is FREE. UK Mainland Only.
We offer a range of shipping options to suit you.
Royal Mail Standard Shipping
£1.50 - Our cheapest shipping method for parcels up to 500g. Parcels are sent using the Royal Mail standard shipping service and usually take 2-5 working days to arrive. This service isn’t tracked at any stage until point of delivery.
Royal Mail Tracked 48
£3.00 - Parcels up to 2kg. Their aim is to deliver in 2-3 working days. You will receive an email from Royal Mail with full tracking details.
UPS Next Working Day – UK Mainland Only
£7.50 – Orders placed before 4pm will be received the next working day, Monday to Friday. You will receive an email from UPS with full tracking details.
UPS Northern Ireland 2 Day Service
£15.00 – This is a two day service from UPS to Northern Ireland. You will receive an email from UPS with full tracking details.
UPS Northern Ireland Next Day Service
£35.00 - This is a next day service from UPS to Northern Ireland. You will receive an email from UPS with full tracking details.
UPS Next Working Day AM – Pre 12 UK Mainland Only
£20.00 - Orders placed before 4pm will be received the next working day before Midday. You will receive an email from UPS with full tracking details.
UPS Next Working Day AM – Pre 10.30 UK Mainland Only
£25.00 - Orders placed before 4pm will be received the next working day before 10.30am. You will receive an email from UPS with full tracking details.
Scottish Islands 2-3 Day Service
£25.00 - This is a two to three day service from UPS. You will receive an email from UPS with full tracking details.
Scottish Highlands 2-3 Day service
£35.00 - This is a two to three day service from UPS. You will receive an email from UPS with full tracking details.
SAME DAY TAXI – Please call 01709 527269 for a quote and we will try to accommodate where possible.
Click and Collect
FREE - We offer a Click & Collect service for customers that are able to collect from our premises at Bearing King. Unit 5, Northfield Business Park, Parkgate, Rotherham S60 1SD United Kingdom.
Please note, you will be notified by email when your order is available for collection.
Shipping Internationally – Europe and Rest of the World
We offer a range of options for shipping around the world. These choices will be displayed dependent on your shipping location once the item is in your basket and you are ready to Checkout.
Returns Policy
1. You may return an unused item in new condition unless faulty within 30 days of receipt. Damaged or used goods cannot be refunded.
2. A copy of our returns form must be included with the returned goods.
3. Customers will be responsible for the original and return shipping charges unless our customer service department determines that we are at fault for an order error or product defect. Bearing King will not be responsible for any return item lost in transit.
4. Once we receive the package and the goods are checked, we will refund you by the payment method used when the order was placed.
5. Please allow 3-5 days for your return to be processed or exchange to be sent.