RRP Bearing Press & Extraction Tool

Instructions for use
Firstly, ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract (see list below). You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing (as shown below) and match it to our list below

(NB: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment / incorrect installation)

Extracting Bearings (RED adaptors) - SOLD SEPARATELY
Place the RED adaptors from your RRP BEARING KIT as shown below, take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.

Wind on the main handle until the parts all come together, make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*), it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuing

Inserting Bearings (BLUE adaptors) - SOLD SEPARATELY
Place the BLUE adaptors from your RRP BEARING KIT as shown below, take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.

Wind on the main handle until all the parts come together, the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle, the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*), it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing

NOTE - Bearing Kits 1, 2 & 3 don’t have male adaptors (just female ones) due to the small size of the bearing bore hole

BEARING Name 688 2rs KIT NO 1 RRP CODE BPET688 BORE SIZE 8 OD SIZE 16
BEARING Name 698 2rs / 398v KIT NO 2 RRP CODE BPET698 BORE SIZE 8 OD SIZE 19
BEARING Name 608 2rs / 608E-2rs KIT NO 3 RRP CODE BPET608 BORE SIZE 8 OD SIZE 22
BEARING Name 609 2rs KIT NO 3a RRP CODE BPET609 BORE SIZE 9 OD SIZE 24
BEARING Name 6800 2rs / 61800 2rs KIT NO 4 RRP CODE BPET6800 BORE SIZE 10 OD SIZE 19
BEARING Name 6900 2rs / 61900 2rs KIT NO 5 RRP CODE BPET6900 BORE SIZE 10 OD SIZE 22
BEARING Name 6000 2rs KIT NO 6 RRP CODE BPET6000 BORE SIZE 10 OD SIZE 26
BEARING Name 6801 2rs / 61801 2rs KIT NO 6a RRP CODE BPET6801 BORE SIZE 12 OD SIZE 21
BEARING Name 6901 2rs / 61901 2rs 7 RRP CODE BPET6901 BORE SIZE 12 OD SIZE 24
BEARING Name 6001 2rs KIT NO 8 RRP CODE BPET6001 BORE SIZE 12 OD SIZE 28
BEARING Name 3802 2rs / 63802 2rs / 6802 2rs / 61802 2rs KIT NO 9 RRP CODE BPET63802 BORE SIZE 15 OD SIZE 24
BEARING Name 1526 2rs KIT NO 10 RRP CODE BPET1526 BORE SIZE 15 OD SIZE 26
BEARING Name 6902 2rs / 6902E-2rs / 61902 2rs / 7902 KIT NO 11 RRP CODE BPET6902 BORE SIZE 15 OD SIZE 28
BEARING Name 6002 2rs KIT NO 12 RRP CODE RRP CODE BPET6002 BORE SIZE 15 OD SIZE 32
BEARING Name 6803 2rs / 61803 2rs KIT NO 13 RRP CODE BPET6803 BORE SIZE 17 OD SIZE 26
BEARING Name 17287 2rs KIT NO 13a RRP CODE BPET17287 BORE SIZE 17 OD SIZE 28
BEARING Name 6903 2rs / 6903E-2rs / 61903 2rs / 61903E-2rs KIT NO 14 RRP CODE BPET6903 BORE SIZE 17 OD SIZE 30
BEARING Name 6003 2rs KIT NO 15 RRP CODE BPET6003 BORE SIZE 17 OD SIZE 35
BEARING Name 6804 2rs / 61804 2rs KIT NO 16 RRP CODE BPET6804 BORE SIZE 20 OD SIZE 32
BEARING Name 6805 / 61805 2rs KIT NO 17 RRP CODE BPET6805 BORE SIZE 25 OD SIZE 37

BORE:Bore hole size of bearing (hole in the centre)
OD:Outer diameter of bearing race