W61905-2RS1 SKF Sealed Stainless Steel Deep Groove Ball Bearing 25x42x9mm
SKF Stainless steel single row deep groove ball bearing with two rubber seals 25mm inside x 42mm outside x 9mm wide, also known as W69052RS, W6905RS, W69052RSR, S69052RS, S6905RS, SS69052RS, SS6905RS, W619052RS1
Regular price
£74.12
inc.VAT
£61.77 exc.VAT
FREE UK MAINLAND DELIVERY ON ORDERS OVER £50
Couldn't load pickup availability
SKF Stainless steel single row deep groove ball bearing with seals or shields on both sides, provide greater chemical and corrosion resistance. As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
Greater chemical and corrosion resistance
Integral sealing prolongs bearing service life
Typical benefits of single row deep groove ball bearings
Dimensions
d 25 mm Bore diameter
D 42 mm Outside diameter
B 9 mm Width
d1 ?30.9 mm Shoulder diameter
d2 ?30.9 mm Recess diameter
D2 ?39.45 mm Recess diameter
r1,2 min.0.3 mm Chamfer dimension
Abutment dimensions
da min.27 mm Diameter of shaft abutment
da max.30.5 mm Diameter of shaft abutment
Da max.40.5 mm Diameter of housing abutment
ra max.0.3 mm Radius of shaft or housing fillet
Calculation data
Basic dynamic load rating C 6.05 kN
Basic static load rating C0 4.5 kN
Fatigue load limit Pu 0.193 kN
Limiting speed 10 000 r/min
Minimum load factor kr 0.025
Calculation factor f0 15.4
Mass
Mass bearing 0.039 kg
Greater chemical and corrosion resistance
Integral sealing prolongs bearing service life
Typical benefits of single row deep groove ball bearings
Dimensions
d 25 mm Bore diameter
D 42 mm Outside diameter
B 9 mm Width
d1 ?30.9 mm Shoulder diameter
d2 ?30.9 mm Recess diameter
D2 ?39.45 mm Recess diameter
r1,2 min.0.3 mm Chamfer dimension
Abutment dimensions
da min.27 mm Diameter of shaft abutment
da max.30.5 mm Diameter of shaft abutment
Da max.40.5 mm Diameter of housing abutment
ra max.0.3 mm Radius of shaft or housing fillet
Calculation data
Basic dynamic load rating C 6.05 kN
Basic static load rating C0 4.5 kN
Fatigue load limit Pu 0.193 kN
Limiting speed 10 000 r/min
Minimum load factor kr 0.025
Calculation factor f0 15.4
Mass
Mass bearing 0.039 kg